FRANK chamber manifolds as an overview

All FRANK chamber manifolds are completely pre-assembled and are delivered leak-tested. With different designs and sizes, we cover the requirements of all building projects.

Verteilerschacht  WM mit Durchflußmesser

Which chamber manifold for which requirement?

You can find an overview in our Chamber overview

FRANK chamber manifold
"CAD model configurator"


Verteilerschacht WM

Chamber manifold type WM

Compact chamber manifolds for the connection of surface collectors, energy baskets or geothermal probes. Execution with up to 8 circuits. Intended for wall mounting. Easy to assemble due to small dimensions and low weight. The distributor is fully equipped with shut-off and control fittings as well as with integrated flow meters. The circuit connections pointing downwards are welded watertight into the bottom of the shaft. The manhole cover is provided with a seal and can be locked.


Verteilerschacht D 400

Chamber manifold D 400 / D 600

Optimized, completely prefabricated solution for small and medium-sized construction projects. For the direct connection of geothermal probes or energy baskets. The chamber wall, floor and cover are made of plastic. All connections are welded watertight through the chamber wall. Integrated manifold with up to 12 circuits, complete with shut-off and control valves. Easy to assemble due to small dimensions and low weight. With lockable plastic manhole cover class A15.


Verteilerschacht 520

Chamber manifold type L-500, L-520, L-540

Manifold with up to 12 circuits in a compact size with an inspection-friendly, bright chamber housing and horizontally arranged manifold bar. The chamber cover can be adjusted to the required height on site using the telescopic insert.
Also available with a shut-off ball valve in the heat pump connection.


verteilerschacht L-750 weiss

Chamber manifold type L-750-T

Chamber manifold in a compact size with an inspection-friendly, light-colored chamber housing with a diameter of 750 mm.
Horizontally arranged manifold with up to 10 circuits.
The chamber is equipped with a telescopic insert. This enables a simple height adjustment of the chamber cover to the requirements directly on site.
Optionally available with a shut-off ball valve in the heat pump connection.


VTS V-1200-T

Chamber manifold type V-1200-T

Chamber manifold made of PE pre-assembled at the factory with an inspection-friendly, light inner surface and an integrated manifold in V-shape. Chamber cover with telescopic insert for easy height adjustment. Class A 15 manhole cover, optionally available as a drive-over version.
Version with up to 24 brine circuits. Manifold complete with shut-off and control valves in the brine circuits. All connections are made watertight through the chamber body.


Verteilerschacht H-1400-T

Chamber manifold type H-1400-T

Chamber manifold made of PE pre-assembled at the factory with an inspection-friendly, light inner surface and an integrated manifold in H-design. Chamber cover with telescopic insert for easy height adjustment. Class A 15 manhole cover, optionally available as a drive-over version.
Execution with up to 40 brine circuits. Manifold complete with shut-off and control valves in the brine circuits. All connections are welded watertight through the chamber wall. 


Types of manifolds

FRANK chamber manifolds contain brine manifolds that are completely pre-assembled at the factory. Up to 40 brine circuits can be installed in an upright standing chamber, with horizontal chambers an even larger number of circuits is possible. The manifolds are equipped with all necessary shut-off and regulating valves in the brine circuits. All connections are welded watertight through the chamber body. The ready-to-connect chamber manifolds can be transported and installed without any problems due to their low weight.

L 1200 inside
Chamber manifold V 1200-T inside
H 1400-T inside

For installation with pressing groundwater and for higher static loads, we offer special chamber manifolds on request:

Submarine

Chamber manifold made of FRANK PE 100 spiral pipe

Individual solutions are made to measure for your project, depending on the size and design. Watertight welded spiral pipe , with a light inner surface that is easy to inspect. The chamber manifolds are equipped with all necessary shut-off and control valves.

On request, the static dimensioning can be carried out for car or truck load or against pressing groundwater.

We are happy to advise you

Privacy policy information

Our website uses external components (such as Google Analytics). These help us to constantly improve our offer and to provide you with a comfortable visit. By loading external components, data about your behaviour can be collected by third parties, which is why we need your permission. Without your permission, there may be restrictions on content and operation. You can find detailed information in our privacy policy.